You are currently visiting our e-Commerce site. Full documentation, user guides, data sheets, videos,
and more as applicable by product, may be found at


Babel Buster BB2-6010 Modbus to SNMP, Modbus RTU to TCP Gateway
Babel Buster BB2-6010 is a self contained server that will autonomously poll multiple serial devices and store the data for later forwarding via Modbus TCP, and vice versa. BB2-6010 includes Modbus RTU master and slave, Modbus TCP client and server, SNMP client and server (agent), v2c traps.

Babel Buster BB2-6010 Modbus to SNMP, Modbus RTU to TCP Gateway

Your Price: $529.00
Retail Price:$661.00
Your Savings:$132.00(20%)
Part Number:BB2-6010

Choose Options

Extended Memory Option help
Serial Port help

Babel Buster BB2-6010 is a Modbus to Modbus and a Modbus to SNMP Gateway. The BB2-6010 is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. The most common use of the BB2-6010 is to map Modbus RTU and/or Modbus TCP devices to SNMP. The SNMP manager can use SNMP Get to retrieve contents of any mapped Modbus register. In addition, the BB2-6010 uses threshold rule templates to continuously monitor Modbus data and generate SNMP Traps upon sensing of “alarm” conditions.

Babel Buster BB2-6010 is an SNMP Agent (server), but also includes an SNMP Client. This means the BB2-6010 can query other SNMP devices and make their data available to Modbus or rule processing to generate traps not originally provided by the other SNMP equipment.


The primary applications for Babel Buster BB2-6010 are serial to Ethernet conversion for Modbus devices, and SNMP access to serial or Ethernet Modbus devices. As a Modbus to Modbus gateway, the BB2-6010 will map multiple RTU devices to a single Modbus TCP server map. It can also map multiple Modbus TCP devices to a single RTU slave map. The BB2-6010 can also do Modbus TCP to Modbus TCP register re-mapping to retrofit equipment to a legacy Modbus register map. The Modbus RTU port can be configured as master or slave. The Modbus TCP port can operate as both client and server (master and slave) concurrently.

• Modbus RTU RS-485 Master or Slave
• Modbus TCP Client and Server
• Modbus TCP over Ethernet 10/100BaseT
• SNMP get/set access to all data points
• SNMP trap generation, user programmable criteria
• 1000 16-bit registers (300 useable for SNMP)
• 500 32-bit floating point registers (100 useable for SNMP)
• Supports Modbus “coils”, input registers, holding registers
• Single/double, signed/unsigned, and IEEE 754
• Modbus register mapping configured via web interface
• Modbus register scaling (x10, x100, x0.1, x0.01, etc.)
• Modbus (master) polling interval configurable per point
• User defined “virtual device” register map
• Supports user HTML “wrapper” 
• Configure via web pages
• Flash file system with XML configuration files
• Online help
• Password protection for web log-on and ftp
• Field upgradeable firmware upload via ftp
• DHCP or static IP address
• Hardened EIA-485 transceiver for Modbus RTU
• Optional RS-232 transceiver (in place of RS-485)
• Powered by 10-30VDC or 12-24VAC 50/60 Hz
• Power Consumption: 0.1A @ 24VDC
• DIN rail mounting, 100mm H x 70mm W x 60mm D
• Pluggable screw terminal block for power & RTU network
• Operating temperature -40°C to +85°C
• Humidity 5% to 90%
• FCC Class A, CE Mark
• Listed* to UL 916 and (Canadian) C22.2 No. 205-M1983
   * BB2-6010 is UL Listed with RS-485, listing of new RS-232 option is pending

Related Items


24VDC Wall Plug Power Supply