You are currently visiting our e-Commerce site. Full documentation, user guides, data sheets, videos,
and more as applicable by product, may be found at www.csimn.com.

 

Babel Buster MX-73-V3 BACnet Router plus Gateway is used to route between BACnet IP and MS/TP, and also includes an SNMPv3 server (agent).
Babel Buster MX-73-V3 BACnet Router plus Gateway is used to route between BACnet IP and MS/TP, and also includes an SNMPv3 server (agent).

Babel Buster MX-73-V3 BACnet Router plus Gateway

Your Price: $419.00
Retail Price:$524.00
Your Savings:$105.00(20%)
Part Number:MX-73-V3
Babel Buster MX-73-V3 is a BACnet router, slave proxy, and client/server gateway that allows remapping objects from multiple slaves into one master. You can use the MX-73-V3 as just a router, just a client/server, or both at the same time. The MX-73-V3 also includes BBMD support. The MX-73-V3 is a performance upgrade of Control Solutions’ original BB2-7030 BACnet router.

The MX-73-V3 as a BACnet Router will route IP to MS/TP and vice versa via its local ports, and supports full router capability for multi-hop internetworks including via NAT WAN routers. Routing is simple to set up. Routing can be used without any other gateway features enabled. Routing can be configured or automatically learned.

The MX-73-V3 as a BACnet Client/Server Gateway will poll BACnet IP and/or BACnet MS/TP slaves or servers, and retain copies of selected object properties. Upstream clients may then query the MX-73-V3 to receive data originating from multiple devices.

The MX-73-V3 is an SNMP Agent that will respond to SNMP v1, v2c, or v3 requests. Local BACnet objects can be assigned to either of the branches of the local MIB for remote access by SNMP Managers. The local data may be accessed as scaled integer or 32-bit floating point (RFC 6340). An SNMP Get to the MX-73-V3 will read local objects and an SNMP Set will write the local objects. If local objects are mapped via the BACnet client to write to other BACnet devices, then SNMP Set will result in writing to a BACnet device.

The MX-73-V3 can send v1, v2c, or v3 traps or notifications based on threshold rules created via templates in the MX-73-V3’s web UI. When data in the local objects meets the rule criteria, the notification will be sent. Notifications can be triggered by reading other BACnet devices or by object values written to the MX-73-V3 by other BACnet devices.


MX-73-V2C

MX-73-V3 Features

• Universal, fully configurable
• No extra software or drivers to buy

• BACnet IP to MS/TP Router
• Configured or learning, I-Am route learning, I-Am-Router route learning
• Slave proxy to support MS/TP slave-only devices
• Client/Server gateway for remapping BACnet objects
• Direct import of CSV files for faster point mapping
• Read/Write any standard BACnet objects as a Gateway
    • Up to 5,000 objects
    • Analog, Binary, Multi-State object types
    • Input, Output, Value objects
• Commandable BACnet objects implement priority array
• BBMD, COV support
• SNMP v1, v2c, v3 Get/Set access to all data points
• SNMP v1, v2c, v3 trap generation, user programmable criteria
• DES encryption support for SNMPv3
• Up to 1,000 MIB variables
• Map any BACnet object to a MIB variable
• Auto-Build MIB on command
• Hardened EIA-485 transceiver for BACnet MS/TP
• 10/100BaseT Ethernet for BACnet IP and SNMP
• Configure via secure web pages with password protection
    • TLS 1.2
    • RSA-1024/SHA-256 self-generated certificates
    • Supports externally generated certificates
• Flash file system with XML configuration files
• Field upgradeable firmware
• Includes “10X” file capacity
• Powered by 12-24V DC/AC 50/60 Hz
• Power Consumption: 0.1A @ 24VDC
• Panel mount, 70mm H x 131mm W x 38mm D
• Pluggable screw terminal block for power & RTU network
• Operating temperature -40°C to +85°C
• Humidity 5% to 90% non-condensing
• FCC Class A, CE Mark

Accessories

24VDC Wall Plug Power Supply
$49.00