You are currently visiting our e-Commerce site. Full documentation, user guides, data sheets, videos,
and more as applicable by product, may be found at www.csimn.com.

 

ValuPoint VP4-2310 Programmable I/O for Modbus RTU
ValuPoint Model VP4-2310 Programmable I/O for Modbus RTU provides slave I/O, includes user programmable control, 14 analog/universal inputs, 3 analog outputs, and 6 relay outputs. VP4-2310 can operate as Modbus master or slave, with all I/O accessible as holding registers and/or coils.

ValuPoint VP4-2310 Programmable I/O for Modbus RTU

Your Price: $539.00
Retail Price:$674.00
Your Savings:$135.00(20%)
Part Number:VP4-2310

Control Solutions’ Model VP4-2310 ValuPoint® Programmable I/O for Modbus RTU is a network I/O device that includes programmable control. The 4th generation ValuPoint® platform is designed to be a building block in a distributed control system where controllers communicate via Modbus RTU.

The ValuPoint® Model VP4-2310 features 14 universal context sensitive inputs. When configured as an analog input, the continuously self-calibrating sigma-delta converter produces 15-bit resolution with high noise immunity. When configured as a discrete input, the converter switches to 10-bit resolution at 1,000 samples per second for fast response.

Analog Input objects provide data from the analog I/O points. Linearization tables are provided for 10K and 20K type II, III, and IV thermistors. Input type and scaling is configured by writing to Modbus registers. Modbus registers also provide access to the outputs.

Pulse input at up to 1kHz is available on 2 channels in all modes. If analog inputs are sampled in fast 10-bit mode, pulse input to 10Hz is available on all channels. Pulse counts are totalizing, and saved to non-volatile memory every 15 minutes.

ValuPoint Model VP4-2310 also includes 3 analog 4-20mA outputs, and 6 Form A relay outputs. All I/O points are accessed as Modbus holding registers, or coils in the case of relays.

ValuPoint® support software, available for download at no cost, includes the VP4-2310 configuration tool, i.CanDrawIt graphical programming tool, and the pliWrite line programming tool. Both programming tools support both simulated execution and live debug. The tools connect via Modbus RTU.

Software Features of Model VP4-2310
• Freely programmable controller
• i.CanDrawIt® graphical programming
• Modbus master or slave operation
• I/O points accessible as holding registers and/or coils
• Total of 320 data objects available
• Data objects accessible as 16-bit or 32-bit registers

Hardware Features of Model VP4-2310
• 14 Analog/universal inputs
--- 0-10VDC, thermistor, discrete, dry contact, pulse
--- 0.1% reference, up to 16-bit resolution
--- Software selectable input types
--- Continuously self-calibrating sigma-delta A/D
--- Non-volatile totalizing count inputs
--- Fast scan mode with 10-bit resolution
• 3 Analog outputs
--- 4-20mA (0-20mA), 8-bit resolution,
--- 500 ohm load max.
• 6 Discrete outputs
--- Form A relay, 2A @ 120VAC, 2A @ 30VDC
• Battery backed real time clock/calendar
• Modbus RTU at 4800 to 38400 baud
• Hardened RS-485 port
• 128KB non-volatile EEPROM configuration file capacity
• 64K Flash for user program
• ARM 32-bit processor, 512K Flash, 56K RAM
• Powered by 18-30VDC or 24VAC 50/60 Hz
--- 0.3A @ 24VDC max.
• DIN rail mounting, 100mm H x 105mm W x 60mm D
• LED indicators for power, RS-485 RX/TX & error
• Pluggable screw terminal blocks
• -40C to +70C, 5%-95% RH non-condensing
• Certifications: FCC, CE, UL 916