Home > Programmable I/O > Programmable I/O for Modbus RTU  >  ValuPoint VP4-2810 Programmable I/O for Modbus RTU
You are currently visiting our e-Commerce site. Full documentation, user guides, data sheets, videos,
and more as applicable by product, may be found at www.csimn.com.

 

ValuPoint Model VP4-2810 Programmable I/O for Modbus RTU provides slave I/O, includes user programmable control, 12 discrete inputs, and 16 discrete (FET) outputs. VP4-2810 can operate as Modbus master or slave, with all I/O accessible as holding registers and/or coils.
ValuPoint Model VP4-2810 Programmable I/O for Modbus RTU provides slave I/O, includes user programmable control, 12 discrete inputs, and 16 discrete (FET) outputs. VP4-2810 can operate as Modbus master or slave, with all I/O accessible as holding registers and/or coils.

ValuPoint VP4-2810 Programmable I/O for Modbus RTU

Your Price: $539.00
Retail Price:$674.00
Your Savings:$135.00(20%)
Part Number:VP4-2810


Control Solutions’ Model VP4-2810 ValuPoint® Programmable I/O for Modbus RTU is a network I/O device that includes programmable control. The 4th generation ValuPoint® platform is designed to be a building block in a distributed control system where controllers communicate via Modbus RTU.

The ValuPoint® Model VP4-2810 features 12 discrete inputs configurable as dry contact closure to ground, or DC voltage sensing (in two groups of 6).

Pulse input at up to 1kHz is available on 2 channels. Pulse input to 10Hz is available on all channels. Pulse counts are totalizing, and saved to non-volatile memory every 15 minutes.

ValuPoint® support software, available for download at no cost, includes the VP4-2810 configuration tool, i.CanDrawIt graphical programming tool, and the pliWrite line programming tool. Both programming tools support both simulated execution and live debug. The tools connect via Modbus RTU.

Software Features of Model VP4-2310
• Freely programmable controller
• i.CanDrawIt® graphical programming
• Modbus master or slave operation
• I/O points accessible as holding registers and/or coils
• Total of 320 data objects available
• Data objects accessible as 16-bit or 32-bit registers

Hardware Features of Model VP4-2310
• 12 Discrete inputs
--- Dry contact closure to ground
--- Voltage sense tolerant to 30VDC
--- Non-volatile totalizing count inputs
--- Pulse counting to 1kHz on 2 inputs
--- Pulse counting to 10Hz on all inputs
• 16 Discrete outputs
--- Open drain FET, 1A @ 30VDC
• Battery backed real time clock/calendar
• Modbus RTU at 4800 to 38400 baud
• Hardened RS-485 port
• 128KB non-volatile EEPROM configuration file capacity
• 64K Flash for user program
• ARM 32-bit processor, 512K Flash, 56K RAM
• Powered by 18-30VDC or 24VAC 50/60 Hz
--- 0.3A @ 24VDC max.
• DIN rail mounting, 100mm H x 105mm W x 60mm D
• LED indicators for power, RS-485 RX/TX & error
• Pluggable screw terminal blocks
• -40C to +70C, 5%-95% RH non-condensing
• Certifications: FCC, CE